Subject: Gear oil check
[Back] [Return to Top of Forum]
| Bob Aldin |
Posted 03-06-2023 at 05:46:22 [URL] [DELETE]
[Reply] [Email]
Gear oil check
Just a quick question about checking the gear box oil level. Is the motor need to be running or off? The 3 point hitch in the up position, correct?
Thanks in advance,
Bob
|
|---|
| Del Huebner |
Posted 03-06-2023 at 16:02:04 [URL] [DELETE]
[Reply] [No Email]
Re: Gear oil check
The motor should be off and the 3 point to its lowest point.
|
|---|
| Bob Aldin |
Posted 03-06-2023 at 18:39:36 [URL] [DELETE]
[Reply] [Email]
Re: Gear oil check
The dipstick says to check with piston fully extended. I was made to believe that the 3 point needs to be in the up position. I'm just confused 🤔.
|
|---|
| Gaspump |
Posted 03-07-2023 at 11:08:20 [URL] [DELETE]
[Reply] [No Email]
Re: Gear oil check
If you have an 2N, 8N or 9N you have the wrong dipstick. If you have a 100 or 101 series or later model extending all cylinders is correct as there may be a loader, rear remote requiring fluid.
|
|---|
[Back] [Return to Top of Forum]
|