Subject: hardee
[Back] [Return to Top of Forum]
| luke |
Posted 03-11-2023 at 19:54:40 [URL] [DELETE]
[Reply] [Email] how can you convert a 49 8n front coil to a can coil i had a diagram on how to do it but i can't find it |
|---|---|
| luke |
Posted 03-12-2023 at 20:59:28 [URL] [DELETE]
[Reply] [Email] is there any diagrams on how to do this? |
| TheOldHokie |
Posted 03-13-2023 at 11:30:01 [URL] [DELETE]
[Reply] [No Email] Save yourself a lot of time and aggravation. This is EZ-PZ and reassonably priced. https://www.jegs.com/i/PerTronix/751/1247XTCONN/10002/ TOF |
| TheOldHokie |
Posted 03-13-2023 at 16:59:18 [URL] [DELETE]
[Reply] [No Email] Let me try that link again >https://www.jegs.com/i/PerTronix/751/1247XTCONN/10002/-1 |
| Ed Gooding (VA) |
Posted 03-11-2023 at 20:59:17 [URL] [DELETE]
[Reply] [Email] Converting front mount distributors to use an external, round-can coil |
| luke |
Posted 03-11-2023 at 21:35:29 [URL] [DELETE]
[Reply] [No Email] thanks Ed |
| JMOR |
Posted 03-13-2023 at 15:37:32 [URL] [DELETE]
[Reply] [No Email] I have done that on two, one wasn't too bad in getting the coil out of housing (very old & potting dried out), but the other ( nearly new & really good potting) was impossible! My final solution was to saw the housing apart, dig coil out and glue housing back together...........long day! |
| luke |
Posted 03-14-2023 at 16:48:05 [URL] [DELETE]
[Reply] [Email] do you have a diagram on how you did yours |
| JMOR |
Posted 03-15-2023 at 10:07:21 [URL] [DELETE]
[Reply] [Email] Not much, but.... |
[Back] [Return to Top of Forum]