N Board Forum - Expanded Thread Page

Subject: Jubilee no power to starter

[Back] [Return to Top of Forum]

Jim    Posted 04-22-2024 at 11:54:33 [URL] [DELETE]        [Reply] [Email]  
  • Jubilee no power to starter
  • I put a new Dennis Carpenter wiring harness on my jubilee (have replaced several in the past) and have no power to the starter solenoid. If I run hot wire from terminal to solenoid starts right up. I replaced neutral safety switch replaced ignition switch. Any chance wiring harness is bad?

    JMOR    Posted 04-22-2024 at 13:20:45 [URL] [DELETE]        [Reply] [No Email]  
  • Re: Jubilee no power to starter
  • If you replaced solenoid, you probably replaced with the wrong type. You might have turned it around and thereby reversed the battery and starter connections.

    Jim    Posted 04-23-2024 at 11:57:55 [URL] [DELETE]        [Reply] [Email]  
  • Re: Jubilee no power to starter
  • Thanks so much, I had reversed it not just once but twice, got in to big a hurry. Thanks again.

    [Back] [Return to Top of Forum]