Re: 19-80 Dozer Blade Frame

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]

Posted by Beth and Allen on December 16, 2016 at 09:33:05 [URL] [DELETE] :

In Reply to: 19-80 Dozer Blade Frame posted by beargap on December 16, 2016 at 05:24:07:

Having not seen it I'm only guessing here. So this is only a suggestion, measure the tube go to the local metal supply yard and get a section of same size tube but get in the 1/4" wall thickness. Cut out the old tube and replace with new (stronger) tube,if you think that might not be strong enough they also make a 3/8" thick wall tube or you can get bar stock the same width and weld sisters on each side of the tubes. just my 2 cents worth,I do this kind of stuff all the time and like you I'm not a professional welder, but pretty good at it. If you could post pictures and some measurements I could give you more precise info.God Bless, Beth and Allen.


Follow Ups:


Post a Followup:
Name   : 
E-Mail : 
Subject: 
Message: To add a single image to your post, click here. To add multiple images to your post, click here. Optional Link URL : http://www.yourwebsite.com Link Title : Website Title Optional Image URL: http://www.myimages.com/mypic.jpg
Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press
browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!
  
   

[ Follow Ups ] [ Post Followup ] [ Implements Forum ] [ FAQ ]