hooking up woods rn500-2 mower to 8n

i restored a woods rm500-2 finishing mower intending to use it with my 1948 8n only to realize that the front caster (gauge) wheels on the mower were too close to the back wheels of the 8n and would hit and jam the wheels if the implement was lifted more than 6 inches. In order to use the mower I can either take off the front gauge wheels on the mower or keep the mower on the ground without raising it, Does anyone have alternate or bettert solutions. Is there a way to extend the length of the lift arms without cutting and welding, Other ideas?

Follow Ups:

• Re: hooking up woods rn500-2 mower to 8n - Lynn Patrick 10:05:21 01/09/22 (0)
• RM500 - Tom Wenrich 19:03:16 01/08/22 (4)
  • Re: RM500 - william 18:05:54 01/10/22 (3)
    • Re: RM500 - Tom Wenrich 11:18:56 01/11/22 (0)
    • Re: RM500 - Tom Wenrich 11:12:15 01/11/22 (1)
      • Re: RM500 - william 19:50:45 01/11/22 (0)
• Re: hooking up woods rn500-2 mower to 8n - Beargap 04:37:05 01/08/22 (0)

Name   : 
E-Mail : 
Subject: 

Message:

To add a single image to your post,  click here.
To add multiple images to your post, click here.

Optional Link URL : ←http://www.yourwebsite.com
Link Title        : ←Website Title
Optional Image URL: ←http://www.myimages.com/mypic.jpg

Enter image characters into the text box.

Press Preview Message button below to proofread message & check if images and/or links are shown before posting message. Press browser's back button if correction is needed. Press Post Message button on Preview Message page to finalized your post. Thanks!