In Reply to: grease instead of 80/90 wt oil in gear box posted by Ronald on August 25, 2020 at 20:43:12:
I bough a used King Kutter 5 ft brush hog a few years ago It is in good condition with little rust, but had a leaky bottom seal. I used a chain hoist to lift it on itís side against a tree and chained it up to the side of the tree. Then I used a couple of wedges made from a 8Ē block of 4X4 with a 4 pound hammer to knock off the stump pan. The seal was pretty easy to replace. So far I donít see any leaks.